Step 1:
Press menu
Select "Advanced Options"
Select "Dish Installation"
Enter the pin "9949"
Select "Network Configuration"
Select "Network 2 Setup" NB: Leave "Network 1 Setup (Home)" unchanged!!
Set Signal Setup to "Enabled" by selecting it, and moving left or right
Set Frequency to "11170"
Set Symbol Rate to "26652
Set Polarization to "Vertical"
Set FEC to "5/6"
Select "Accept these settings"
Press menu
Select "Advanced Options"
Select "Dish Installation"
Enter the pin "9949"
Select "Network Configuration"
Select "Network 2 Setup" NB: Leave "Network 1 Setup (Home)" unchanged!!
Set Signal Setup to "Enabled" by selecting it, and moving left or right
Set Frequency to "11170"
Set Symbol Rate to "26652
Set Polarization to "Vertical"
Set FEC to "5/6"
Select "Accept these settings"
Step 2:
Select "Network 3 Setup"
Set Signal Setup to "Enabled"
Set Frequency to "11625"
Set Symbol Rate to "15000
Set Polarization to "Vertical"
Set FEC to "3/4"
Select "Accept these settings"
Exit once to go back to the "Dish Installation" menu
Select "Scan All Networks"
Your decoder will go into scanning mode and might take a while to scan all 9 networks. Do not interrupt the process even if it seams to take longer than you expected!
Once completed, your picture will return as normal
Select "Scan All Networks"
Your decoder will go into scanning mode and might take a while to scan all 9 networks. Do not interrupt the process even if it seams to take longer than you expected!
Once completed, your picture will return as normal
To access you public channels, press the "TV button" on your remote control.The "Bouquet Options" menu will appear.Select "Public PAS7/10
"Pressing any of the arrow buttons on your remote, will open the screen with all the available Free to Air channels. To access the radio channels, simply select the "music note" on your remote (while still on Public PAS7/10 bouquet) and select the Vodacom Adsat channel.
No comments:
Post a Comment